The Bravo Company Recce rifle was originally developed by US SEAL Team Armorers to provide SEALs with a lightweight modular carbine that had enhanced ballistic performance and utility over an issue M4.

Matching the size of an issue SOPMOD, the Recce runs smoother and allows more agile weapons control, thanks to its mid-length gas system and extended handguard.

Mid-length systems deliver the same compact size of a carbine, with less overpressure and recoil for a smoother running platform with more agile weapon control. The mid-length system also allows for a longer hand guard and by extension, a longer iron sight radius for improved accuracy when engaging with iron sights.

Capable of mounting optics, laser and other accessories along the length of the system at 12, 3, 6 and 9 o'clock, the extended length railed handguard allows for faster manipulation and improved accuracy when engaging targets at close to intermediate ranges.

The system is also free floated, minimizing possible mechanical pressure distortions to barrel alignment and allowing barrel vibration to occur at its natural frequency for more accurate shots.

A chrome lined bore and chamber is now a worldwide standard in the industry for a battle rifle. The chrome bore and chamber is harder than the barrel steel and on the USGI M16/M4 rifles will aid in chambering, extraction, and reliability. It increases velocity, and also resists against fouling and corrosion from extended use in the field. This gives the end user a longer barrel life with less required time in maintenance and cleaning.

UPPER RECEIVER

• Receiver Machined from Aluminum Forgings 7075-T6 and Hardcoat Anodized per MIL-A-8625F, Type III, Class 2
• M4 Feed Ramp Flat Top with Laser T-markings

BCM BOLT CARRIER GROUP

• Machined from MIL-SPEC Carpenter No. 158 Steel
• HPT/MPI (High Pressure Tested/Proof) · (Magnetic Particle Inspected)
• Shot Peened
• Tool Steel Extractor w/ BCM Extractor Spring
• Black Extractor Insert
• Chrome Lined Carrier (Full Auto Profile)
• Chrome Lined Gas Key Hardened to USGI Specifications, w/ Staked Grade 8 Fasteners per MIL-SPEC

BCM LOWER RECEIVER

• Receiver Machined from Aluminum Forgings 7075-T6, Hardcoat Anodized (per MIL-A-8625F, Type III, Class 2)
• Low Shelf for RDIAS Installation - Installation of a registered drop-in auto sear allows weapon to fire on full automatic
• Low Shelf for Accuwedge use
• Fire Controls Marked SAFE and SEMI
• BCM Milspec 7075-T6 Receiver Extension
• Staked M4 Lock Nut
• USGI H Buffer (1 USGI Tungsten, 2 Steel)

• Independently Certified MIL-SPEC 11595E Barrel Steel, Manganese Phosphate Barrel Finish on Entire Barrel
• 16" BCM Enhanced Light Weight(ELW) Profile Barrel 1/7 Twist, M4 Feed Ramp Extension
• USGI 5.56mm NATO Chrome Lined Bore and Chamber
• HPT/MPI(High Pressure Test) (Magnetic Particle Inspected), per MIL-SPEC

SPECIFICATIONS

• Model: Recce-16 MCMR LW
• Caliber: 5.56NATO
• Barrel Length: 16"
• Capacity: 30
• Gas System: Mid-Length
• Twist Rate: 1:7
• Weight: 5.8 lbs
• Overall Length: 35.5"